The research focuses on enhancing production capacity in manufacturing industries by applying the Single Minute Exchange of Die (SMED) technique, a method aimed at improving efficiency during assembly changeovers. The objectives are to: (i) identify inefficiencies in the changeover process, (ii) implement techniques to improve efficiency, and (iii) propose productivity enhancements through SMED. Using a combination of qualitative and quantitative methods, the study analyzes assembly line productivity and provides an improvement plan by comparing internal and external operations, optimizing changeover timing, and converting internal operations to external ones. Conducted via a case study of Food & beverage industry, the research demonstrates increased productivity and improved changeover effectiveness on the production line.
Agustiady, T., & Cudney, E. A. (2024). TPM and Sigma. In Total Productive Maintenance (pp. 16–49). CRC Press.
Bednarski, L., Roscoe, S., Blome, C., & Schleper, M.C. (2024). Geopolitical disruptions in global supply chains: a state-of-the-art literature review. Production Planning & Control, 1–27.
Berhe, H. H., Gebremichael, H. S., & Beyene, K. T. (2023). Development, validation and verification of innovative integrated Kaizen philosophy (CI) framework and its implementation procedure for enhancing manufacturing industries sustainable competitiveness. International Journal of Quality & Reliability Management, 40(10), 2463–2518.
Braglia, M., Di Paco, F., Frosolini, M., & Marrazzini, L. (2023). Quick changeover design: a new Lean methodology to support the design of machines in terms of rapid changeover capability. Journal of Manufacturing Technology Management, 34(9), 84–114. https://doi.org/10.1108/JMTM-12-2022-0430
Da Silva, I. B., & Godinho Filho, M. (2019). Single- minute exchange of die (SMED): a state-of-the-art literature review. The International Journal of Advanced Manufacturing Technology, 102, 4289–4307.
Das, A., Srihari, K., Pasupuleti, S., Kumar, I., & Depuru, B. K. (2024). Maximising Operational Uptime: A Strategic Approach to Mitigate Unplanned Machine Downtime and Boost Productivity using Machine Learning Techniques.
Holweg, M. (2007). The genealogy of lean production. Journal of Operations Management, 25(2), 420–437.
Huang, W.-J., Zhang, M.-W., Li, B.-Y., Wang, X.- H., Zhang, C.-H., & Yu, J.-G. (2024). 5S management improves the service quality in the outpatient-emergency pharmacy: from management process optimisation to staff capacity enhancement. European Journal of Hospital Pharmacy, 31(3), 259– 266.
Irgang, L., Barth, H., & Holmén, M. (2023). Data- driven technologies as enablers for valuecreation in the prevention of surgical site infections: a systematic review. Journal of Healthcare Informatics Research, 7(1), 1–41.
Joshi, A. A., Wankhede, P., Karwade, T., & Nerkar, P. S. (2024). Application of value stream mapping (vsm) in a small-scale furniture manufacturing industry Journal, 15(6), 474–487.
Kempa, W. M., & Paprocka, I. (2024). A Discrete- Time Queueing Model of a Bottleneck with an Energy- Saving Mechanism Based on Setup and Shutdown Times. Symmetry, 16(1), 63.
Liker, J. K., & Choi, T. Y. (2004). Building deep supplier relationships. Harvard Business Review, 82(12), 104–113.
Maia, D. dos R. P., Lizarelli, F. L., & Gambi, L. D. N. (2024). Industry 4.0 and Six Sigma: a systematic review of the literature and research agenda proposal. Benchmarking: An International Journal, 31(3), 1009–1037.
Marsden, A., & Shahtout, A. (2024). International organization for standardization. Clinical Laboratory Management, 271–277.
McIntosh, R. I., Culley, S. J., Mileham, A. R., & Owen, G. W. (2000). A critical evaluation of Shingo’s’ SMED’(Single Minute Exchange of Die) methodology. International Journal of Production Research, 38(11), 2377–2395.
Mendes Monteiro, J., Torres, D., Ramos, A. L., & Pimentel, C. (2023). The use of virtual reality as e- training tool for dies’ changeover in stamping presses: a case study on automotive industry. International Journal of Lean Six Sigma, ahead-of-print (ahead- of-print).
So, S., & Sun, H. (2010). Supplier integration strategy for lean manufacturing adoption in electronic?enabled supply chains. Supply Chain Management: An International
Sonnenberg, M., Gubala, C., Burry, J., Griffith, J., Zarlengo, T., & Melonçon, L. (2024). Implementing a continuous improvement model for assignment evaluation at the technical and professional communication program level. Journal of Technical Writing and Communication, 54(1), 24–45.
Sousa, E., Silva, F. J. G., Ferreira, L. P., Pereira, M. T., Gouveia, R., & Silva, R. P. (2018). Applying SMED methodology in cork stoppers production. Procedia Manufacturing, 17, 611–622.
Terelak-Tymczyna, A., & Niesterowicz, B. (2024). Lean Manufacturing in Digital Transformation of Manufacture. International Scientific-Technical Conference Manufacturing, 74–83.
Tortorella, G. L., Saurin, T. A., Fogliatto, F. S., Tlapa Mendoza, D., Moyano-Fuentes, J., Gaiardelli, P., Seyedghorban, Z., Vassolo, R., Cawley Vergara, A. F. Mac, & Sunder M, V. (2024). Digitalization of maintenance: Exploratory study on the adoption of Industry 4.0 technologies and total productive maintenance practices. Production Planning & Control, 35(4), 352–372.
Rasib, A. H. A., Yaakub, M. S. A., Ghazali, I., Rahman, M. S. A., & Rafai, Z. F. M. (2026). Enhancing Productivity through Quick Changeovers: A SMED-Based Methodology in Manufacturing Industry. International Journal of Academic Research in Business and Social Sciences, 16(2), 728–744.
Copyright: © 2026 The Author(s)
Published by Knowledge Words Publications (www.kwpublications.com)
This article is published under the Creative Commons Attribution (CC BY 4.0) license. Anyone may reproduce, distribute, translate and create derivative works of this article (for both commercial and non-commercial purposes), subject to full attribution to the original publication and authors. The full terms of this license may be seen at: http://creativecommons.org/licences/by/4.0/legalcode
